It is common to think that owning a swimming pool could be burdensome especially with the cost of upkeep but the trick for keeping it clean and avoiding unexpected costs is through regular, routine maintenance. Here are five tips to follow that will help you keep your swimming pool clean and healthy.
Regularly clear away debris that floats on the surface before it has a chance to sink in, especially if you have surrounding trees. Debris that sinks in is difficult to get rid of so make sure to clear up every other day or so. You can use a hand skimmer or leaf skimmer net to get rid of all unwanted leaves, insects and other debris. Empty the skimmer or strainer baskets and hose them down once a week to increase the efficiency of the circulation system and reduce chlorine use.
Vacuum and Clean
It is important to clean the entire unit each week. Use an appropriate brush to clean the steps, ladder, walls and tile as this helps minimize algae growth. Vacuum weekly to maintain water cleanliness and to regulate the chlorine level. Attach the head of the vacuum to a telescopic pole attached to the hosepipe and next, submerge and allow the hose to fill with water. Finally, attach it to the hose port at the bottom of the skimmer or the suction port and move the vacuum head slowly across the bottom and sides.
Clean the Filter
Regularly cleaning the filter will maintain efficiency in the circulation system. Cleaning the filter depends on the type of filter installed. It is advisable to replace sand filters with either a DE or a cartridge filter system. Make use of the backwash feature on the valve. If it is a DE filter then, backwashing and emptying it every other week should be sufficient, while for a cartridge filter system, gently remove and rinse off with a garden hose. Keep in mind that neglecting to clean the filters regularly will eventually lead to pool pump repairs in City Beach due to unnecessary strain.
Maintain pH and Chlorine Balance
Test the water regularly to make sure it is clean. The pH system is used to measure acidic and alkalis levels in the water where pH 7 indicates a neutral state. High acidity or high alkalinity levels can cause equal damage and reduces the effectiveness of chlorine. An ideal pH level is between 7.2 and 7.8. Use a simple testing kit to check on the pH level in the water. Avoid neglecting to adjust the chemical balance after testing. Chlorine levels should be between 1-3ppm. You could use either chlorine tablets or liquid chlorine in order to maintain chlorine levels. Indigo Pool care provides pool maintenance and services.
Check Water Level
Constantly check the water level in order to make sure it does not fall too low, especially lower than the level of the skimmer. A low water level will cause the pumps to suck air leaving you with damage and unwanted pool pump repairs. If the water level seems low, fill it up using a garden hose to maintain a safe level.
Maintenance can be easy when the right procedures are used. Stick to routine checks and fix leaks and cracks as soon as you find them. Follow a regular cleaning routine to maintain a clean and healthy pool that is as safe as it is enjoyable.